For full product information and application advice please follow this link to Advice – Glass Paint. Below is a short summary.

• Water-based Peelable eco paint with satin finish
• Coverage – approx. 12m2 per litre
• Protect clothing as paint will stain
• Shake & Stir thoroughly before and stir during use
• Apply to clean, dry, sound, shiny surface
• Use synthetic brush, roller or sprayer. Best coating results are produced by using a roller with a foam sleeve
• Apply a nice thick coating as thin patchy coats won’t peel very easily
• Avoid the rain – allow approx. 12-24 hours drying time (depending on how hot the weather is) when painting externally before exposing to rain or high levels of humidity as this can damage the coating
• Touch-dry in under an hour or two in fine weather. Can overcoat after approx. 4-6 hours in normal conditions. Drying time extended by cold or damp conditions. Can be safest to leave to dry for 24 hours in poorer weather before applying 2nd coat
• One coat is enough to provide shading. A second coat will increase the solidity and colour of the coating
• Clean wet equipment with water and a spot of detergent if required. Don’t allow paint to dry in sprayer nozzles
• Dispose of responsibly. Empty tins are fully recyclable and most local authorities can dispose of leftover paint
• Remove Peelable Glass Paint by picking at a corner and peeling coating off. Coatings can dry out over time especially if in south-facing areas. You can re-hydrate the coating by soaking with water and leaving for approx. 10 minutes before trying to peel. Coating can be removed by a paint scraper or you can apply a fresh coat over the top of an old dry coating – leave to bond to the old coating for about 2 weeks then peel both coats off together. Old coatings can be returned to the Thorndown factory in Glastonbury, Somerset for recycling